
Stand Collar Zip-Up Denim Jacket — built to be worn open or closed.
A hip-length jacket with a full-length front opening, cut roomy enough to take a layered shirt underneath without pulling across the back. It is the sort of piece that earns its place by being useful on an ordinary Tuesday rather than by being impressive in a photograph, and those are the ones that stay in rotation. It comes in 1 colour.
Tightly woven with a dry, slightly textured face. It holds a fold, resists the light creasing you get from sitting, and softens with wear rather than thinning, so the second season looks better than the first if you look after it.
Pattern pieces are cut to a consistent grain, which is why the two sides hang the same way instead of one twisting forward. Fastenings are load-bearing: the buttons, zip or drawcord are the ones the design actually needs, not the cheapest that would hold the shape on a shelf. It is graded S/M/L/XL/2XL/3XL, and the flat measurements for every size are in the chart below. The seams are flat-felled or bound rather than overlocked and left raw, so there is nothing to catch and nothing to fray out of the wash. Hems are re-turned twice before stitching, and the shoulder seam carries a strip of tape so it does not stretch out of line on a hanger.
A short jacket built on a straight body with a stand collar — the kind of layer that works over a shirt in autumn and under a coat in winter. The finishing is what you notice after a month rather than in the first minute: nothing scratchy where the cloth meets skin, and no trim that starts to look tired before the fabric does. A zip-front jacket cut to sit on the hip, with the collar standing on its own and the sleeves finishing at the wrist.
Layering is where it earns its place: it sits under a jacket without bunching across the shoulders and over a base layer without pulling tight across the back.
Runs the whole way and parks at the top, not a partial opening.
Finishes on the hip bone, so it layers under a coat without bunching.
Bar-tacked where a jacket is actually pulled hardest.





| Style | Stand Collar Zip-Up Denim Jacket |
| Sizes | S, M, L, XL, 2XL, 3XL — flat measurements in the size chart |
| Materials | Tightly woven cloth, dry matte surface |
| Colours | Dark Blue |
| What you get | 1 x Stand Collar Zip-Up Denim Jacket |
Men's regular fit, measured flat with the garment laid out. Model is 183 cm and wears L.
| Measurement (cm) | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Chest (flat) | 54 | 55.5 | 57 | 60 | 63 | 66 |
| Shoulder width | 45.5 | 46 | 47 | 48.5 | 50 | 51.5 |
| Waist (flat) | 50 | 51.5 | 53 | 56 | 59 | 62 |
| Centre-back length | 70 | 71 | 72 | 74 | 76 | 78 |
| Sleeve length (long) | 62.5 | 63 | 63.5 | 64.5 | 65.5 | 66.5 |
All measurements are taken flat with the garment laid out, in centimetres. Allow ±1.5 cm for hand-measured variation.
The stand collar holds its shape, so it frames the neck without a scarf.
The hip-length cut means it layers without bunching at the waist.
Cut roomy enough for the layer, and the front zip parks at the top.
Keeps the silhouette straight from shoulder to hem.
Machine wash cold, inside out, and hang to dry. Wash separately for the first couple of cycles in case of any surplus dye, and use a cool iron on the reverse if needed. Avoid bleach entirely — it weakens the fibre long before it changes the colour.
It stands on its own without being rigid, so it stays up when the jacket is open and sits flat when it is zipped.
The body is cut roomy through the chest and seat. If you plan to wear it over a heavy layer, size up and check the chest measurement in the chart.
We have not stated the zip material, because it is not something we can confirm with certainty across production runs. What we can confirm is that it runs the full length of the front and parks at the top, rather than being a partial opening.