
Striped Short Sleeve Button Up Shirt — plain front, clean line.
A button-front shirt cut with a straight body and a shorter collar, so it reads smart without a tie. It is the sort of piece that earns its place by being useful on an ordinary Tuesday rather than by being impressive in a photograph, and those are the ones that stay in rotation. It comes in 3 colours.
Closely worked with a smooth, low-sheen surface that does not flatten or pill where it rubs. The seams are neat on the inside as well as the outside, and the piece keeps its shape after washing because the fibres were rested before cutting rather than stitched straight off the machine.
The seams are flat-felled or bound rather than overlocked and left raw, so there is nothing to catch and nothing to fray out of the wash. Hems are re-turned twice before stitching, and the shoulder seam carries a strip of tape so it does not stretch out of line on a hanger. It is graded M/L/XL/2XL/3XL, and the flat measurements for every size are in the chart below.
A short-sleeve shirt on a relaxed block, with a plain placket and no shoulder yoke bulk. Pockets, plackets and waistbands are the parts that decide whether a garment gets worn, so they are treated as structure rather than as decoration. A button-up shirt with a clean front and a collar that holds its shape when worn open as well as buttoned.
Layering is where it earns its place: it sits under a jacket without bunching across the shoulders and over a base layer without pulling tight across the back. It is built to be worn rather than saved for an occasion — the cloth takes a full day in it, and the cut reads the same at the end of that day as it did at the start. Choose it from what the listing says rather than from the letter on something you already own. A chest and waist reading tells you far more than the label does, which is why the chart below lists both.
Cut with enough stand that it holds its shape worn open.
Long enough to stay tucked, short enough to wear loose.
Hangs the same on both sides instead of twisting forward.





| Style | Striped Short Sleeve Button Up Shirt |
| Sizes | M, L, XL, 2XL, 3XL — flat measurements in the size chart |
| Materials | Firm, evenly worked surface with light give |
| Colours | Black, Blue, Red |
| What you get | 1 x Striped Short Sleeve Button Up Shirt |
Men's regular fit with a fixed waistband, measured flat. Model is 183 cm and wears L.
| Measurement (cm) | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|
| Waist (flat) | 42.5 | 44 | 47 | 50 | 53 |
| Hip (flat) | 54.5 | 56 | 59 | 62 | 65 |
| Inseam | 75 | 76 | 77.5 | 79 | 80.5 |
| Front rise | 29.5 | 30 | 31 | 32 | 33 |
| Leg opening (flat) | 19.5 | 20 | 21 | 22 | 23 |
All measurements are taken flat with the garment laid out, in centimetres. Allow ±1.5 cm for hand-measured variation.
The collar has enough stand to look deliberate on its own.
Works as a light layer without the collar collapsing.
Long enough to stay tucked through a day of sitting and standing.
The hem line is cut to look intentional rather than borrowed.
Machine washable on a cool cycle, or hand wash if you prefer. Air dry, shake out and it is ready to go again; there is nothing here that needs pressing or reshaping after washing.
Yes — it is cut with enough stand to sit up on its own when the top button is undone, which is the point of this collar shape.
The fabric is opaque across the full colour range. The specification notes the fabric weight where it matters.
It is cut long enough to stay tucked and short enough to look deliberate untucked. The centre-back length is in the size chart.